Spritzspachtel
-
Pneumatic Piston Pump BMP 11120
Pneumatic piston pumpsHigh Pressure Pump 111.20 R, High Pressure Filter Type Universal, AirCombi Pressure Regulator, Release Agent, Grounding Wire & BA
-
Pneumatic Piston Pump BMP 11142
Pneumatic piston pumpsHigh Pressure Pump 111.42 R, High Pressure Filter Type Universal, Airless Pressure Regulator, Release Agent, Grounding Wire & BA
-
Pneumatic Piston Pump BMP 4330
Pneumatic piston pumpsHigh Pressure Pump 43.30 RS, High Pressure Filter Type Universal, AirCombi or Airless Pressure Regulator, Release Agent, Grounding Wire & BA
-
Pneumatic Piston Pump BMP 4353
Pneumatic piston pumpsHigh Pressure Pump 43.53 RS, High Pressure Filter Type Universal, AirCombi or Airless Pressure Regulator, Release Agent, Grounding Wire & BA
-
Pneumatic Piston Pump BMP 7218
Pneumatic piston pumpsHigh Pressure Pump 72.18 RS, High Pressure Filter Type Universal, AirCombi or Airless Pressure Regulator, Release Agent, Grounding Wire & BA
-
Pneumatic Piston Pump BMP 7232
Pneumatic piston pumpsHigh Pressure Pump 72.32 RS, High Pressure Filter Type Universal, AirCombi or Airless Pressure Regulator, Release Agent, Grounding Wire & BA
-
Pneumatic Piston Pump BMP 7265
Pneumatic piston pumpsHigh Pressure Pump 72.65 R, High Pressure Filter Type Universal, Airless Pressure Regulator, Release Agent, Grounding Wire & BA
-
Screw pump BMP 5 – Spraying set III
BMP5Suitable for:
Fine plaster and other sprayable materials up to 2 mm grain size -
Screw pump BMP 5 – Spraying set II
BMP5Suitable for:
Sealing slurry, spray filler and other materials up to 1 mm grain size -
Screw pump BMP 5 bypass set for paints and liquid materials
BMP5Suitable for:
Paint, plaster and materials with a small grain size. -
Screw pump BMP 6 230V – Hopper 60 ltr.
BMP6The BMP 6 worm pump is the universal device of choice for building renovation. This device is ideal for processing all mineral-based materials.
and bituminous products with a grain size of up to 2.0 mm by injection or spraying (borehole suspensions, sealing slurries,
Fine plasters, grouting mortar, joint mortar, thick coatings).
Products containing solvents should only be used after consultation with the manufacturer. For pure injection / backfilling, only
a 230 Volt / 50 Hz power connection is required. Depending on the product, a compressor with an air output of 150
ltr (low-viscosity media) up to 4oo ltr (thick bitumen coating). A large selection of accessories enables use with
all packer systems available on the market. The material is conveyed via a rotor and stator. The
delivery rate can be infinitely adjusted from 0.5 to 14 ltr / min. A remote control is optionally available. -
Gasoline Piston Pump HSS 9950
Gasoline powered piston pumpsCompletely ready to spray on trolley with direct suction, 15m material hose, 1.2m hose whip, spatula gun and reversible nozzle
-
Electric/Hydraulic Piston Pump HSS 9950
Electric/hydraulic piston pump HSS 9950Completely ready to spray on trolley with direct suction, 15m material hose, 1.2m hose whip, spatula gun and reversible nozzle
-
Electric piston pump TS 1750
Electric piston pumpsready to spray in trolley with direct suction, 15m material hose, Airless gun and rev. tip.
-
Electric piston pump TS 1750 with hose reel
Electric piston pumpsready to spray in trolley with direct suction, 15m material hose, Airless gun and rev. tip.
-
Electric piston pump TS 1750 Filler set
Electric piston pumpsCompletely ready to spray in a trolley with direct suction, 15 m material hose, 1.5 m hose whip, filler gun and reversible nozzle
-
Electric piston pump TS 1750 Filler set with material container
Electric piston pumpsCompletely ready to spray in a trolley with direct suction, 15 m material hose, 1.5 m hose whip, filler gun, reversible nozzle and 90 l material container
